Reviews
For the price this is awesome! However, there are a few things that need to be modified in order for it to fit properly. There’s a plastic mount under the dash that needs to be cut so the bracket can sit flush. I had to redrill and tap the mounting holes for the pedal because in the original spot, I have the AC climate control module and so the pedal position sensor hits. I moved the holes over about 1/2” and now everything fits nicely.
I bought the complete kit, including cable sets and adapters.
The wait was simply too long, the adapter arrived in the wrong color, and all in all, with shipping and taxes, it was too expensive.
I personally wouldn't buy it again
Amazing customer service and reached before the eta.
It was nice to find a kit with the bolts and correct sizes. Well packed and fast shipping. Will look around for more for my build.
Extremely good quality parts and exactly what I needed. Fast delivery time from America to Ireland. Will most definitely be back
Haven’t installed yet but plates look great and should work as intended.
Top notch product for a good price.
This JDM to US license plate adapter bracket lets you fit a US plate on my GR Corolla without drilling into the bumper, which is exactly what I wanted. The bracket itself is solid and aligns nicely, but it didn’t come with the M6 clip nut needed for installation, so I had to grab one separately to make it fit. Once installed, it looks clean and does the job perfectly. Overall, a good solution if you want to avoid drilling your bumper.
Perfect fitment excellent quality
My oil cooler was disconnected after a turbo setup. It was leaking oil. This bypass stopped the leak.
While we ended up not using it, was a handy spot to rout a harness with a grommet. The part was machined well, fit well, and anodizing was good.
good stuff
Had to lightly clearance the adapter for the throttle body for how we wanted to mount it. Was quick work. Machine work on all flanges was good, anodizing was done well. We added a secondary mount to the throttle pedal assembly to stiffen it a bit, this is just a preference thing and no way they could have this for every application. But their throttle pedal mount did bolt up and fit very well. Also appreciated the flexibility in mounting it offered. Its the little things like this as an installer that show the parts were well thought out. Over all we are very happy with the kit and will definitely refer my other clients to use it.
I bought this kit to replace the cable setup on my 180SX. This kit came with everything I need to convert from the old setup to the new DBW setup. Everything bolted up and the fitment was amazing.
Worked perfect for my Suzuki 1.6 16V!
This quality of the injector harness cover is top notch. I did add the DEI gold film inside to possibly help with the heat.
Couldn't fit any better with the Mishimoto radiator on my vr4.
I have been selling and installing these intakes for years. We have tested these intakes to an extreme level of performance using them on our personal drag car with 60psi of boost an nitrous on top with zero failures. We have run low 7 second passes at over 180mph in a 3400lb car and never missed a beat. Its not any new news that they are made in china and come from a similar factory as the other china billet intake but zero fab puts in the extra time for quality control by making sure the welds are penetrated properly, the power are lined up and match and the flanges are matched flat. Nobody else does this. Ive seen the "same" intake from another brand and u can see the difference in the finish product.
